Keysight M8920A, Getting Started Manual

Page: 61 / 93

Step 5 - Launch Modular TRX Application
M8920A Getting Started Guide 61
The VXT and its TCP/IP address is TCPIPO::localhost::hislip4::INSTR . This
address is used by the controller's Automatic Test System to communicate with
the VXT using the PCIe-PCIe bridge.
Address Setting in Remote Control
1. Find the controller's address by selecting
then select Show System
Settings.
2. From the Windows Start menu, run Keysight Connection Expert.
a. Set the Hostname or IP Address as localhost.
b. Set the Hostname or IP Address as localhost.
c. Set Protocol to HiSlip and set Remote Name to hislip4.
d. Select Allow *IDN Query and then select Test This VISA address to verify
connection.
e. Once the connection has been verified, click Accept.