Keysight M8290A, Getting Started Manual, Page: 39 / 56

Keysight M8290A Getting Started Guide 39
AXle Chassis 4
Setting the Startup Delay for the Embedded Controller
For the PCIe connection between the embedded controller and the
M829xA module to work properly, the AXIe modules must boot in a certain
order. To assure that this order is maintained at all times, a startup delay
needs to be configured on the AXIe chassis’ system module. All M8290A
systems are pre-configured accordingly at the factory. However, if a
different AXIe chassis is used with any M829xA module, it may be
necessary to set the startup delay manually. To do this, please complete
the process described below.
1 On the embedded controller, go to the AXIe chassis' web interface (e.g.
by typing “169.254.1.0” into the address bar of a web browser):