38
Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide
2
Basic Setup for M8100A
Contact your Keysight representative to replace or service the
chassis/module. See
Contacting Keysight Service and Support
Step 9 - Install Keysight IO Libraries Suite (not required for M8100A-BU6)
IO Libraries Suite version 17.1 or later is required. Always use the latest
version of the Keysight IO Libraries.
1 Disconnect any devices connected to the host computer.
2 If open, close all applications on the host computer.
3 Download and install the IO Libraries from
www.keysight.com/find/iosuite
.
4 Follow the instructions as prompted during the installation.
5 After installation, you will see the Keysight IO icon in the taskbar
notification area of the host computer screen.
Step 10 - Install M8070B Software (not required for M8100A-BU6)
The M8070B software does not require any license for its installation.
However, it can only be used to perform some basic operations. For
advance operations, you need to install the driver packages in the M8070B
software. For details, go to
Step 12 - Install Module Driver Package in the
NOTE
Perform this step if you are setting up an M8100A-BU5 system or the
host computer you are using as part of the M8100A system requires I/O
library installation.
NOTE
Perform this step if you are setting up an M8100A-BU5 system or an
M8100A system in which the host computer requires I/O library
installation.
