Keysight M8000 Series Getting Started Manual Download Page 36

Page: 36 / 58

Keysight M8040A High-Performance BERT Getting Started Guide

Basic Setup for M8040A

To install the software
1 Insert the CD ROM into the host computer or download the latest

M8070B software from

www.keysight.com/find/M8040A.

2 Double-click the setup (.exe) file.

The InstallShield Wizard is displayed.

3 If displayed, click

Install

to continue or click

Next

if the system

controller meets the minimum system configuration requirements

displayed by the wizard.

4 When displayed, accept the license agreement and click

Next

5 Click

Install

to start the installation then follow any on-screen

prompts/instructions.

6 In Windows click

Start

All Programs

Keysight M8070B

Keysight

M8070B

to verify software installation. The Startup screen of the

M8070B software should display.

Step 9 - Install the Plugins

The basic functionality of the M8070B can be used without installing any

license. However, for advanced features, you need to install the M8070B

plugins. The plugins file (*.M8KP) can be downloaded from Keysight web

page. The M8070B software supports the following plugins:
• Advanced Measurement Package
• Error Distribution Analysis Package

Please make sure that you have M8070B software version 6.0 or later

installed on your system. The M8070B software comes with a

Plugin

Manager

to simplify all the tasks related to plugin management. The

Plugin Manager

also allows you to install, uninstall and upgrade the

plugins.

NOTE

Verify your account permissions. Ensure that you have full administrative

privileges (run as Administrator) before you install or upgrade the

M8070B software on a PC running Windows 10. Not doing so may result

in the installation failure. Please contact your system administrator to

provide you the administrative rights.

NOTE

Please note that the M8070B plugins requires a license for its activation.

Summary of Contents for M8000 Series



























































Search results

Summary of Contents for M8000 Series

Reviews:

Related manuals for M8000 Series

Brands by name

Popular brands

Keysight M8000 Series, Getting Started Manual

Search results

Summary of Contents for M8000 Series

Reviews:

Related manuals for M8000 Series

Brands by name

Popular brands