Keysight E8357D/67D & E8663D PSG User’s Guide 255
Multitone Waveform Generator
Creating, Viewing, and Optimizing Multitone Waveforms
Figure 9-3
To Edit the Multitone Setup Table
This procedure builds upon the previous procedure.
1.
Press
Initialize Table
>
Number of Tones
>
10
>
Enter
.
2.
Press
Done
.
3.
Highlight the value (
On
) in the
State
column for the tone in row 2.
4.
Press
Toggle State
.
5.
Highlight the value (
0 dB
) in the
Power
column for the tone in row 4.
6.
Press
Edit Item
>
–10
>
dB
.
7.
Highlight the value (
0
) in the
Phase
column for the tone in row 4.
8.
Press
Edit Item
>
123
>
deg
.
9.
Press
Apply Multitone
.
NOTE
Whenever a change is made to a setting while the multitone generator is
operating (
Multitone Off On
set to On), you must apply the change by
pressing the Apply Multitone softkey before the updated waveform will be
generated. When you apply a change, the baseband generator creates a
multitone waveform using the new settings and replaces the existing
waveform in ARB memory.
Intermodulation
Distortion
Multitone
Channels
