Keysight E8357D/67D & E8663D PSG User’s Guide 107
Basic Digital Operation
Using the Dual ARB Waveform Player
Playing a Waveform
This procedure applies to playing either a waveform segment or a waveform
sequence.
This example plays the waveform sequence created in the previous procedure.
1.
Select a waveform sequence:
a.
Press
Mode
>
Dual ARB
>
Select Waveform
.
b.
Highlight a waveform sequence (for this example,
TTONE+MTONE
)
from the
Sequence
column of the
Select Waveform
catalog, and
press
Select Waveform
.
The display shows the currently selected waveform
(for example,
Selected Waveform: SEQ:TTONE+MTONE
).
2.
Generate the waveform:
Press
ARB Off On
to On.
This plays the selected waveform sequence.
During the waveform sequence generation, the
ARB
and
I/Q
annunciators
activate.
Editing a Waveform Sequence
This example shows how to edit waveform segments within a waveform
sequence, and then save the edited sequence under a new name. Within the
editing display, you can change the number of times each segment plays (the
repetitions), delete segments, add segments, toggle markers (described on
), and save changes.
NOTE
If you do not store changes to the waveform sequence prior to exiting the
waveform sequence editing display, the changes are removed.
1.
Press
Waveform Sequences
>
Edit Selected Waveform Sequence
, and
highlight the first entry.
2.
Press
Edit Repetitions
>
100
>
Enter
. The second segment is automatically
selected.
3.
Press
Edit Repetitions
>
200
>
Enter
.
4.
Save the edited file as a new waveform sequence:
a.
Press
Name And Store
.
b.
Press
Editing Keys
>
Clear Text
, then enter a new file name (for
example,
TMTONE200
).
c.
Press
Enter
.
