98 Keysight E8357D/67D & E8663D PSG User’s Guide
Basic Digital Operation
Arbitrary (ARB) Waveform File Headers
Modifying and Viewing Header Information in the Dual ARB Player
Once a modulation format is turned off, the waveform file is available only to
the dual ARB player. This is also true for downloaded waveform files. Because
of this, future edits to a waveform’s header information must be performed
using the dual ARB player.
To modify header information in the dual ARB player, the waveform file must
be playing in the dual ARB player (although you can
view
the header
information in the dual ARB player without playing the file)
You can reapply saved header settings by reselecting the waveform file for
playback. When you do this, the values from the
Saved Header Settings
column are applied to the PSG.
Modifying Header Information
All of the same header characteristics shown in Modifying Header Information
in a Modulation Format are valid in the dual ARB player. This task guides you
through selecting a waveform file and accessing the header for the selected
file, then refers you back to the aforementioned procedure to perform the
modifications.
1.
Select a waveform:
a.
Press
Mode
>
Dual ARB
>
Select Waveform
.
b.
Using the arrow keys, highlight the desired waveform file.
c.
Press the
Select Waveform
softkey.
2.
Play the waveform: Press
ARB Off On
to On.
3.
Access the header: Press
ARB Setup
>
Header Utilities
.
4.
“Modifying Header Information in a Modulation Format”
to edit
the header information:
—
For a default header, read the information in step one on
then perform the remaining steps in the procedure.
—
To modify an existing file header, start with step three on
.
The rest of this section focuses on the additional file header operations found
in the dual ARB player.
