C
External Instrument Calibration
62
Keysight E6961A User Guide and Method of Implementation
Figure C-2
BroadR-Reach Compliance Test Application Main Menu
2
This opens the
Calibrate Disturbing Signal
dialog box for the selected AWG.
3
With the appropriate AWG Address set and the correct oscilloscope channels
selected, click the
Calibrate
button to start the calibration process.
4
When the software finishes the calibration, click the
Done
button to return to
the Main Menu. Refer to the E6961A online help for a more detailed
explanation.
Calibrating the ENA
Before using the ENA, it must be calibrated using the Return Loss Calibration
board. See
below for the connection diagram. Calibrate the ENA using
the instructions in the ENA’s User’s Guide.
