Keysight E6650A EXF, User Programming Manual

Page: 71 / 657

2 Programming the Test Set
STATus Subsystem
Initial S/W Revision Prior to A.02.00
Questionable Event Query
This query returns the decimal value of the sum of the bits in the Questionable Event register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode All
Remote Command :STATus:QUEStionable[:EVENt]?
Example STAT:QUES?
Preset 0
Status Bits/OPC
dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Negative Transition
This command determines which bits in the Questionable Condition register will set the corresponding bit
in the Questionable Event register when the condition register bit has a negative transition (1 to 0). The
variable <integer> is the sum of the decimal values of the bits that you want to enable.
Mode All
Remote Command :STATus:QUEStionable:NTRansition <integer>
:STATus:QUEStionable:NTRansition?
Example STAT:QUES:NTR 16
Temperature summary ‘questionable cleared’ will be reported to the Status Byte Register.
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Positive Transition
This command determines which bits in the Questionable Condition register will set the corresponding bit
in the Questionable Event register when the condition register bit has a positive transition (0 to 1). The
variable <integer> is the sum of the decimal values of the bits that you want to enable.
Sequence Analyzer User's & Programmer's Reference 71