6 List Sequence Measurements
Source
Delete Segment From ARB Mem
Allows you to remove a segment from ARB playback memory.
Key Path
Source, Modulation Setup, ARB, Select Waveform, Segments in ARB Memory
Remote Command
:SOURce:RADio:ARB:DELete <string>
Example
:SOUR:RAD:ARB:DEL “testwaveform.bin”
Notes
<string> - specifies the waveform to be deleted from the ARB playback memory.
When in Sequence Analyzer mode and Include Source is Yes, an attempt to delete a file from ARB
memory is rejected with an error.
When Include Source is No and you specify a file that does not exist within ARB memory, an error is
generated.
It is possible to delete files from within the ARB memory when the ARB is ON. However, if you
attempt to delete the file that is currently playing an error is generated.
It is possible to delete a file from within the ARB memory when the sequencer state is ON and the file
is not being used by the List Sequencer. If you attempt to delete a file which is being used by the list
sequencer, an error is generated.
When sequencer state is On, even if ARB state is On, the selected waveform will not be played. In
this case, if the selected waveform is not used in List Sequence, it can be deleted and the ARB state
is turned Off.
If the ARB is ON and you load a file to ARB memory or delete a file from ARB memory, the playing
waveform segment may not keep phase continuity during the ARB memory operation. The waveform
will be replayed after the ARB operation is finished.
Initial S/W Revision
A.05.00
Delete All From ARB Memory
Allows you to remove all segments from ARB playback memory.
Key Path
Source, Modulation Setup, ARB, Select Waveform, Segments in ARB Memory
Remote Command
:SOURce:RADio:ARB:DELete:ALL
Example
:SOUR:RAD:ARB:DELete:ALL
Notes
When in Sequence Analyzer mode and Include Source is Yes, an attempt to delete all files from ARB
memory is rejected with an error.
When Include Source is No and you attempt to delete all files from ARB memory when the ARB is
currently playing a file, all files except the one playing are deleted and an error is generated.
If you attempt to delete all files from ARB memory when there are waveform files used in
and
state is ON, all files except the files currently
being used in list sequencer are deleted, and an error is generated.
If the ARB is ON and you load a file to ARB memory or delete a file from ARB memory, the playing
waveform segment may not keep phase continuity during the ARB memory operation. The waveform
will be replayed after the ARB operation is finished.
Initial S/W Revision
A.05.00
Sequence Analyzer User's & Programmer's Reference
625
