6 List Sequence Measurements
Source
Table: UTRA Absolute Radio
Frequency Channel Number 1.28
Mcps TDD Option
Frequency Band
Frequency Range
UARFCN Uplink and Downlink
transmission
For operation in frequency band as
defined in subclause 5.2 (a)
1900–1920 MHz
2010–2025 MHz
9504 to 9596
10054 to 10121
For operation in frequency band as
defined in subclause 5.2 (b)
1850–1910 MHz
1930–1990 MHz
9254 to 9546
9654 to 9946
For operation in frequency band as
defined in subclause 5.2 (c)
1910–1930 MHz
9554 to 9646
For operation in frequency band as
defined in subclause 5.2 (d)
2570–2620 MHz
12854 to 13096
For operation in frequency band as
defined in subclause 5.2 (e)
2300–2400 MHz
11504 to 11996
For operation in frequency band as
defined in subclause 5.2 (f)
1880–1920 MHz
9404 to 9596
Radio Setup
Allows access to the sub-menus for selecting the radio standard and associated radio band. You can also
set a frequency reference and offset.
This menu is greyed out when on E6630A. Radio band settings for GSM, cdma2000, and so on -- most of
which are not actually supported in E6630A, which has three narrow frequency bands. So band settings
are grayed out.
Key Path
Source, Frequency
Initial S/W Revision
A.05.00
Radio Standard
Allows access to the channel band sub-menus to select the desired radio standard. When you have
selected the radio standard, you can then set an active channel band. The radio standard and the active
channel band allow you to use channel numbers to set frequency automatically.
Key Path
Source, Frequency, Radio Setup
Remote Command
:SOURce:FREQuency:CHANnels:BAND NONE | PGSM | EGSM | RGSM | DCS1800 |
PCS1900 | TGSM810 | GSM450 | GSM480 | GSM700 | GSM850 | BANDI | BANDII
| BANDIII | BANDIV | BANDV | BANDVI | BANDVII | BANDVIII | BANDIX |
BANDX | BANDXI | BANDXII | BANDXIII | BANDXIV | BANDXIX | USCELL |
USPCS | JAPAN | KOREAN | NMT | IMT2K | UPPER | SECOND | PAMR400 |
PAMR800 | IMTEXT | PCS1DOT9G | AWS | US2DOT5G | PUBLIC | LOWER | BAND1
| BAND2 | BAND3 | BAND4 | BAND5 | BAND6 | BAND7 | BAND8 | BAND10 |
Sequence Analyzer User's & Programmer's Reference
527
