6 List Sequence Measurements
List Sequence Measurements
bandwidth percent parameter specifies the percent of total power in these channels. The valid range for this
parameter is 0.0 to 1.0, where 1.0 represents 100%. The default for this parameter is 0.99, which will
return the bandwidth that contains 99% of the total channel power.
Preset
[0.99]
Range
0 – 1.0
Initial S/W
Revision
A.14.00
Channel x-dB Bandwidth Array
Example
CALC:FPOW:POW1:DEF " XdBBandwidth =[–6.02, –3.01, –1.0]"
Notes
This parameter only applies for channels whose Function is set to XdBBandwidth. The X dB bandwidth
parameter is used to specify the power relative to the peak channel power over which the bandwidth is
calculated. The parameter value must be a negative number.
Preset
[–3.01]
Range
–200 to 0 dB
Default Unit
dB
Initial S/W
Revision
A.14.00
Define Fast Power Measurement Query (Remote Command Only)
The DEFine? command is used to retrieve a list of all defined parameters in an ASCII string format
M
o
d
e
All
R
e
m
o
t
e
C
o
m
m
a
n
d
:CALCulate:FPOWer:POWer[1,2,…,999]:DEFine?
E
:CALC:FPOW:POW1:DEF?
Sequence Analyzer User's & Programmer's Reference
289
