3 Input/Output Functions
Input/Output
Preset
RFIO4
State Saved
Saved in State
Initial S/W Revision
A.14.00
Output Config
Accesses keys that configure various output settings, like the frequency reference output, trigger output
and analog output.
Key Path
Input/Output
Backwards Compatibility
Notes
In ESA there was not a user interface to enable the Video Output (Analog Output), Trigger Output, or
Gate Output. In the X-Series each of these physical connectors requires configuration, thus the
user interface has been added for X-Series, along with the potential for an output you think is
always on to be switched off.
Initial S/W Revision
Prior to A.02.00
Trig Out
Select the type of output signal that will be output from the Trig 1 Out, or Trig 2 Out connectors.
Key Path
Input/Output, Output Config
Remote Command
:TRIGger|TRIGger1|TRIGger2[:SEQuence]:OUTPut HSWP | MEASuring | MAIN |
GATE | GTRigger | OEVen | SPOint | SSWeep | SSETtled | S1Marker |
S2Marker | S3Marker | S4Marker | OFF
:TRIGger|TRIGger1|TRIGger2[:SEQuence]:OUTPut?
Example
TRIG:OUTP HSWP
TRIG2:OUTP GATE
Dependencies
The second Trigger output (Trig 2 Out) does not appear in all models; in models that do not support it,
the Trig 2 Out key is blanked, and sending the SCPI command for this output generates an error,
“Hardware missing; Not available for this model number” In models that do not support the Trigger
2 output, this error is returned if trying to set Trig 2 Out and a query of Trig 2 Out returns OFF.
Preset
Trigger 1: Sweeping (HSWP)
Trigger 2: Gate
This is unaffected by a Preset but is preset to the above values on a "Restore Input/Output Defaults"
or "Restore System Defaults->All"
State Saved
Saved in instrument state
Initial S/W Revision
Prior to A.02.00
120
Sequence Analyzer User's & Programmer's Reference
