3 Input/Output Functions
Input/Output
Key Path
Input/Output, RF Output & Test Set Config
Remote Command
[:SENSe]:FEED:RF:PORT:OUTPut RFOut | RFIO1 | RFIO2 | GPSout | GNSSout |
RFIO3 | RFIO4
[:SENSe]:FEED:RF:PORT:OUTPut?
Example
:FEED:RF:PORT:OUTP RFIO1
Preset
This is unaffected by Mode Preset but is set to RFOut on a "Restore Input/Output Defaults" or
"Restore System Defaults -> All"
State Saved
Saved in State
Readback
The current RF Output Port selected is read back to this key
Initial S/W Revision
A.05.01
Modified at S/W Revision
A.14.00
RF Output
The RF port that will be used for the current output.
Key Path
Input/Output, RF Output & Test Set Config, RF Output
Example
:FEED:RF:PORT:OUTP RFO
Notes
If RF Output is selected as RF Output Port, you need to choose the settings in the Half Duplex Config
menu to determine which port (RFIO3 or RFIO4) will be used.
ReadBack
RF Output
Initial S/W Revision
A.05.01
Modified at S/W Revision
A.14.00
RFIO1
The RF port that will be used for the current output
Key Path
Input/Output, RF Output & Test Set Config, RF Output
Example
:FEED:RF:PORT:OUTP RFIO1
Dependencies
Not available in E6607C.
ReadBack
RFIO1
Initial S/W Revision
A.05.01
RFIO2
The RF port that will be used for the current output
Key Path
Input/Output, RF Output & Test Set Config, RF Output
118
Sequence Analyzer User's & Programmer's Reference
