Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 2673 / 2870

15 Power Control Measurement
Meas
State Saved Saved in instrument state.
Range OFF|ON|0|1
Initial S/W Revision Prior to A.02.00
RRC Filter State
Toggles the root-raised cosine filter function between On and Off.
Mode WCDMA
Remote Command [:SENSe]:PCONtrol:FILTer[:RRC][:STATe] 0|1|OFF|ON
[:SENSe]:PCONtrol:FILTer[:RRC][:STATe]?
Example PCON:FILT OFF
PCON:FILT?
Notes You must be in the W-CDMA mode to use this command. Use INSTrument:SELect to set the mode.
Dependencies When Meas Method is Waveform, this key is grayed out.
Couplings When RRC Filter Auto is ON, RRC Filter State changes depending on the Meas Method: When Meas
Method is changed to Chip Power, RRC Filter State is set to ON; and when Meas Method is changed
to Waveform, it is set to OFF.
Preset 0
State Saved Saved in instrument state.
Range On|Off
Initial S/W Revision Prior to A.02.00
Capture Interval
Accesses a menu that enables you to select the number of frames for data acquisition.
Key Path
Meas Setup
Mode WCDMA
Notes For consistency, this parameter must be controlled with a float numeric from remote commands, but
the front panel interface uses Enum for easier operation.
Dependencies This Parameter is coupled with MeasType. 8 Frames cannot be set (menu key is grayed out) when
MeasType is SlotPhase.
Couplings See Dependencies
Preset 4 Frames
State Saved Saved in instrument state.
Range 1 Frame|2 Frames|4 Frames|8 Frames
Initial S/W Revision Prior to A.02.00
W-CDMA & HSPA Measurement Applications Reference 2673