Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 203 / 2870

4 Input/Output Functions
Input/Output
which DOES contain an antenna unit, a Mass Storage error is generated.
This command will generate an “Option not available” error unless you have the proper option
installed in your instrument.
Preset Not affected by a Preset. Set to OFF by Restore Input/Output Defaults
State Saved Saved in instrument state.
Backwards Compatibility
Notes Unlike legacy analyzers, Preset does not turn Corrections off (Restore Input/Output Defaults does).
Initial S/W Revision A.02.00
Modified at S/W Revision A.14.00
Properties
Accesses a menu that lets you set the properties of the selected correction.
Key Path
Input/Output, Corrections
Initial S/W Revision A.02.00
Select Correction
Specifies the selected correction. The term "selected correction" is used throughout this document to
specify which correction will be affected by the functions.
Key Path
Input/Output, Corrections
Mode SA, I/Q Analyzer, Phase Noise, VXA, RTSA, EMI Receiver, DVB-T/H, DTMB, DVB-T/H, DTMB, W-
CDMA, LTE & LTE-Adv FDD, LTE & LTE-Adv TDD, Sequence Analyzer, BTooth
Notes The selected correction is remembered even when not in the correction menu.
Preset Set to Correction 1 by Restore Input/Output Defaults
Readback Correction 1|Correction 2|Correction 3|Correction 4|Correction 5|Correction
6|Correction7|Correction8
Initial S/W Revision A.02.00
Modified at S/W Revision x.14.50
Antenna Unit
For devices (like antennas) that make measurements of field strength or flux density, the correction array
should contain within its values the appropriate conversion factors such that, when the data on the
analyzer is presented in dBµV, the display is calibrated in the appropriate units. The "Antenna Unit" used
for the conversion is contained within the corrections array database. It may be specifiedor loaded in from
an external file or SCPI.
W-CDMA & HSPA Measurement Applications Reference 203