manualshive.com logo in svg

Keysight E3661B, User Manual, Page: 18 / 38

Share
Download
Keysight E3661B User Manual Download Page 18

18

Keysight Instrument Rack E7950A-1.3m E3661B-1.6m E3662B-2.0

Description

Support Rails

Equipment is supported in the rack by support rails running from front to back. 

The rails are screwed to the vertical columns. See Figure 7 for an illustration  of a 

System II rail. System II rails are used with any instrument that conforms to 

Keysight System II product specifications, and are the standard support rail.
Only after securing a pair of rails with screws can equipment be installed.
The mounting slots in the columns are positioned to make support rail 

placement convenient in EIA units. Additionally, they are marked to make 

matching the heights of matching support rails easy.

Figure 8

System II Rail with Support Columns and Attaching Hardware

Rack Lifting Hooks

Four lifting hooks are fitted to the top of the rack. Together, they can support  the 

weight of a rack loaded to maximum recommend gross weight. Each hook  is 

capable of supporting 227 kg (500 lbs). Maximum recommended gross  weight is 

816 kg (1800 lbs).

Summary of Contents for E3661B







































Reviews:

No comments