Keysight E3633A, User Manual

Page: 100 / 205

4 Remote Interface Reference
100 Keysight E3633A and E3634A User’s Guide
SCPI Command Summary
This section summarizes the SCPI ( Standard Commands for Programmable
Instruments ) commands available to program the power supply over the remote
interface. Refer to the later sections in this chapter for more complete details on
each command.
Throughout this manual, the following conventions are used for SCPI command
syntax.
– Square brackets ([ ]) indicate optional keywords or parameters.
– Braces ({ }) enclose parameters within a command string.
– Triangle brackets (< >) indicate that you must substitute a value or a code for
the enclosed parameter.
– A vertical bar ( | ) separates one of two or more alternative parameters.
First-time SCPI users, see page 143 .