Keysight DSOX1202A, User Manual

Page: 216 / 330

216 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
20
Save/Recall (Setups, Screens, Data)
• Setup (*.scp) — The oscilloscope's horizontal timebase, vertical sensitivity,
trigger mode, trigger level, measurements, cursors, and math function
settings that tell the oscilloscope how to make a particular measurement.
See "To save setup files" on page 217.
• 8-bit Bitmap image (*.bmp) — The complete screen image in a reduced color
(8-bit) bitmap format. See "To save BMP or PNG image files" on page 217.
• 24-bit Bitmap image (*.bmp) — The complete screen image in a 24-bit color
bitmap format. See "To save BMP or PNG image files" on page 217.
• PNG 24-bit image (*.png) — The complete screen image in a 24-bit color PNG
format that uses lossless compression. Files are much smaller than the BMP
format. See "To save BMP or PNG image files" on page 217.
• CSV data (*.csv) — This creates a file of comma-separated values of all
displayed channels and math waveforms. This format is suitable for
spreadsheet analysis. See "To save CSV, ASCII XY, or BIN data files" on
page 218.
• ASCII XY data (*.csv) — This creates separate files of comma-separated values
for each displayed channel. This format is also suitable for spreadsheets. See
"To save CSV, ASCII XY, or BIN data files" on page 218.
• Reference Waveform data (*.h5) — Saves waveform data in a format that can be
recalled to one of the oscilloscope's reference waveform locations. See "To
save reference waveform files to a USB storage device" on page 220.
• Multi Channel Waveform data (*.h5) — Saves multiple channels of waveform
data in a format that can be opened by the N8900A Infiniium Offline
oscilloscope analysis software. You can recall the first Analog or Math
channel from a multi channel waveform data file.
• Binary data (*.bin) — This creates a binary file, with a header, and data in the
form of time and voltage pairs. This file is much smaller than the ASCII XY
data file. See "To save CSV, ASCII XY, or BIN data files" on page 218.
• Lister data (*.csv) — This is a CSV format file containing serial decode row
information with commas separating the columns. See "To save Lister data
files" on page 220.
• Mask (*.msk) — This creates a mask file in a Keysight proprietary format that
can be read by Keysight InfiniiVision oscilloscopes. A mask data file includes
some oscilloscope setup information, but not all setup information. To save
all setup information including the mask data file, choose "Setup (*.scp)"
format instead. See "To save masks" on page 221.