180
Keysight B2980B User’s Guide, Edition 1
Front Panel Reference
Function Key Group
Values of GPIO Pins, /BUSY, /SOT, and /EOT
0 to 7 (integer). Numbers 1 to 7 indicate the DIO pins 1 to 7, respectively. 0
indicates that it is not used.
For GPIO Pins, multiple continuous pins are assigned. For example, “1, 2, 3, 4”
indicates that the DIO pins 1 to 4 are assigned. Then LSB is DIO pin 1.
Limit Test Setup Dialog Box
This dialog box provides the following parameters for setting the data
configuration of the limit test.
Feed Data
Type of data used for the pass/fail judgement of the limit test,
AMPS, COUL., VOLTS, OHMS, or MATH.
AMPS: Current measurement data
COULS.: Charge measurement data (B2985B/B2987B)
VOLTS: Voltage measurement data (B2985B/B2987B)
OHMS: Resistance data (B2985B/B2987B)
MATH: Calculation result data of math expression
Test Index
Index of limit test, No. 1 to 12.
The index numbers 1 to 12 are associated with the bin numbers
1 to 12. See
“Limit Test Result Dialog Box” on page 185
Limit Test
Limit test for data specified by the Feed Data and Test Index
parameters, ON or OFF
Function
Test mode, LIMIT is always displayed.
Pass Pattern
Bit pattern for the limit test
pass
state. For the SORTING mode.
Up Pattern
Bit pattern for the
failed-by-exceeding-upper-limit
state. Used
for the GRADING mode.
Up Limit
Upper limit for the pass/fail judgement. Used for the GRADING
mode.
Low Pattern
Bit pattern for the
failed-by-exceeding-lower-limit
state. Used
for the GRADING mode.
Summary of Contents for B2980B Series
