Test Set Operating System
3
Getting Started Guide
71
It is possible a newer version of the instrument software is available on the web at
Configuring recovery prompt timing
You can configure the time at which the test set power-up process waits for the selection
of the recovery process by performing the following steps:
The installation process can take up to 45 minutes. Do not turn the instrument
power off or serious damage may occur. If any pop up windows appear, click
OK
or
Ignore
to proceed.
8
When the installation has finished, select
Yes, I want to restart my computer
now
,
Finish
.
9
After the instrument restarts, the newly
installed version of the X-Series instrument
software will run.
Additional recovery steps may be required to fully recover the system to a
more current working state. This could involve restoring your own backups of
the instrument configuration, including re-installing applications, data, and
performing system customizations.
Installing the Software
Step
Notes
