Operating and Service Guide 85059-90015 5
85059G 1.0 mm Connector Gage
Safety and Regulatory Information
Safety and Regulatory Information
Review this product and related documentation to familiarize yourself with
safety markings and instructions before you operate the instrument. This
product has been designed and tested in accordance with international
standards.
Table 1
Instrument Markings
When you see this symbol on your instrument, you should refer to the instruments instruction manual
for important information.
This symbol indicates hazardous voltages.
This symbol indicates that the instrument requires alternating current (ac) input.
The CE mark is a registered trademark of the European Community. If it is accompanied by a year, it
indicates the year the design was proven.
The C-Tick mark is a registered trademark of the Australian Spectrum Management Community.
The CSA mark is a registered trademark of the Canadian Standards Association.
1SM1-A
This text indicates that the instrument is an Industrial Scientific and Medical Group 1 Class A product
(CISPER 11, Clause 4).
This symbol indicates that the power line switch is ON.
This symbol indicates that the power line switch is in STANDBY position.
This symbol indicates that the power line switch is OFF
