Keysight 1000B Series User Manual Download Page 18

Page: 18 / 148

Keysight 1000B Series Oscilloscopes User’s Guide

Getting Started

Step 1. Inspect the package contents

Inspect the shipping container for damage.

Keep a damaged shipping container or cushioning material until you have

inspected the contents of the shipment for completeness and have checked the

oscilloscope mechanically and electrically.

Verify that you received the following items in the oscilloscope packaging:
• Oscilloscope.
• Power cord.
• N2862A 10:1 10 M

passive probes, quantity = 2.

• Documentation CD.
• Front panel overlay (if language option other than English is chosen).

If anything is missing, or if you need to order additional probes, power cords,

etc., contact your nearest Keysight Technologies sales office.

Inspect the oscilloscope.
• If there is mechanical damage or a defect, or if the oscilloscope does not

operate properly or does not pass performance tests, notify your Keysight

Technologies sales office.

• If the shipping container is damaged, or the cushioning materials show signs

of stress, notify the carrier; then, contact your nearest Keysight Technologies

sales office.
Keep the shipping materials for the carrier’s inspection.
The Keysight Technologies sales office will arrange for repair or replacement

at Keysight’s option without waiting for claim settlement.

Summary of Contents for 1000B Series





















































































































































Search results

Summary of Contents for 1000B Series

Reviews:

Related manuals for 1000B Series

Brands by name

Popular brands

Keysight 1000B Series, User Manual

Search results

Summary of Contents for 1000B Series

Reviews:

Related manuals for 1000B Series

Brands by name

Popular brands