Keysight 1000 Series User Manual Download Page 115

Page: 115 / 156

Saving, Recalling, and Printing Data

Keysight 1000 Series Oscilloscopes User’s Guide

115

To save data to CSV format files

You can save captured data (in CSV, comma-separated value format) to an

external USB drive when it is connected to the front panel USB host port.

Press

[Save/Recall]

In the Storage menu, press

[Storage]

Continue pressing the

Storage

softkey or turn the entry knob to select “CSV”.

To specify the amount of data to be saved, press

Data Depth

to toggle between

“Displayed” and “Maximum”.

To specify whether oscilloscope parameters be saved along with the data, press

Para Save

to toggle between “ON” and “OFF”.

Press

External

Use the disk manager dialog to navigate to the folder where you want to save

the file (see

“To navigate the directory hierarchy"

on page 117).

In the External menu, press

New File

, enter the filename (see

“To edit folder/file

names"

on page 118), and press

Save

Summary of Contents for 1000 Series





























































































































































Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands

Keysight 1000 Series, User Manual

Search results

Summary of Contents for 1000 Series

Reviews:

Related manuals for 1000 Series

Brands by name

Popular brands