V3050A SA Frequency Extender Getting Started Guide 39
Safety and Maintenance Information
Connector Care
Cleaning Connectors
1.
Inspect the connectors for dust, dirt, metal fragment, oils or film, and
debris.
2.
Blow off any dust with a filtered, clean supply of compressed air.
3.
Add a few drops of high-purity isopropyl alcohol to a small cleaning swab
(do not apply alcohol directly to the parts).
4.
Gently wipe connecting surfaces with the end of the cleaning swab.
5.
Blow dry with compressed air.
6.
Inspect and repeat cleaning procedure if necessary.
When using isopropyl alcohol to clean connectors do not allow the liquid
to flow down inside the connector. This may cause measurement errors
due to residue inside the connector. If possible keep the connector facing
down.
