36 V3050A SA Frequency Extender Getting Started Guide
Safety and Maintenance Information
Connector Care
Applying Torque
For the 1 mm Input Port connector, use the dual torque wrench. For matching
non-ruggedized connectors using the inner threads, to the V3050A, use the
4 lb-in torque wrench.
Figure 2-4 Wrenches on Test Port
Two wrenches must be used to avoid stress on semi-rigid cables.
The silver end of the dual torque wrench is 4 lb-in. The red end of the
torque wrench is 10 lb-in.
< 90°
Groove marks
the correct place
to hold wrench
Handle begins to break
(correct point to stop)
Do not turn
Handle fully broken
(not recommended)
Direction to
tighten connection
