32
User’s and Service Guide U3047-90002
U3047AE04
Controlling the U3047AE04 with N5247A
GPIB Control Mode
The PNA-X GPIB Command Processor feature allows you to send remote commands and data
to the PNA-X rear-panel GPIB connector and Test Set I/O connector. More information
regarding the GPIB Command Processor can be found in the PNA-X Help menu.
•
Overview
•
How to Access GPIB Command Processor
•
GPIB Command Processor Console
Overview of the GPIB Control
The GPIB Command Processor allows you to send address and data to control an external Test
Set, without needing to create a remote program. The user is required to manually input
address and data using the GPIB Command Processor Console in the PNA-X Help menu.
•
GPIB Command Processor settings can not be saved or recalled.
•
Address and data can be
written
from the GPIB Command Processor.
