U3022BH10
Controlling the System with the PNA-X
Selecting an S-Parameter Measurement
S-Parameter selection can be accomplished using Response > Measure. Use the drop-down
menu to select 144 for a 12-Port, 196 for a 14-Port or 576 S-Parameters for a 24-Port system.
The first number in the Sxx selection is the Receiver Port and the second number will be the
Source Port. Any port can be selected to be the Receiver, Source or both, as in S11. The front
panel R LED indicates the port is the Receiver and the S LED indicates the port is the Source.
The 'B' Model analyzer provides an S-Parameter selection using the keypad. For example, to
select S16:
ME
AS [
ME
AS]
> Enter S
-
Parameters >[
[1][.][6] [
Enter
]
.
Figure 38
S-Parameter Measurement
Selecting a New S-Parameter Measurement
S-Parameter Tab: Multiple S-Parameters can be made by selecting Trace/Chan > Trace > New Trace. -OR-
(Instrument > Trace > New Trace)
. Use the drop-down menu and select of any of the S-Parameters.
Figure 39
New S-Parameter Measurement
48
U3022BH10 User's and Service Guide
