U3022AM42
Front and Rear Panel Features
Always use the three-prong AC power cord supplied with this product. Failure
to ensure adequate grounding by not using this cord may cause damage to
the product.
Power Cords
A line power cord is supplied in one of several configurations, depending on the destination of
the original shipment. Keysight can supply additional certified power cords to meet region
electrical supply and receptacle configurations. Please contact Keysight at
www.keysight.com
for assistance in power cord selection.
The detachable power cord is the instrument disconnecting device. It
disconnects the mains circuits from the mains supply before other parts of the
instrument. The front panel switch is only a standby switch and is not a LINE
switch (disconnecting device)
.
Available Fuse
•
Fuse (F 5 A/250V, 2110-0709) UL listed and CSA certified.
For continued protection against fire hazard replace line fuse only with same
type and rating. The use of other fuses, circuit breakers or materials is
prohibited.
Figure
5
Line Fuse
Verify that the premise electrical voltage supply is within the range specified
on the instrument.
16
Keysight U3022AM42 User's and Service Guide
