U3022AM06
Control Lines
External Voltage Supply Configuration
Figure 5
7
illustrates an example of the connection with an external DC power supply.
Connect the positive and negative voltage supply from the external power supply to
the positive input (pin 13) and the negative input (pin 14). Connect the power supply
DC ground to pin 15.
Turning On the Test Set using an External Power Supply.
1.
Turn
on
the Test Set.
2.
Connect the DUT.
3.
Turn
on
the external power supply.
Turning On the Test Set using an External Power Supply.
1.
Turn
off
the Power Supply.
2.
Turn
off
the Test Set.
3.
Disconnect the DUT.
Figure 5
7
Test Set to the DUT and External DC Power Supply
8
1
15
14
13
TO DUT (Only required Lines)
GND
+
Gnd
Ͳ
Gnd
DC Power Supply
12
13
14
15
1
2
8
2 to 5 Vdc
TEST SET
Line 1
Line 2
Line 8
GND
Positive: 0 to 5 Vdc
Negative:
Ͳ
5 to 0 Vdc
NC
9
(Rear Panel View)
Keysight U3022AM06 User's and Service Guide
67
