Keysight Technologies U3022AH10, User'S And Service Manual

Page: 19 / 92

U3022AH10 Front and Rear Panel Features
Figure 5 Rear Panel (Multiport Test Set)
Test Set Interface Pass Through Interface
Line Module Voltage Adjust
DUT
Control
Connector
Control Lines and Voltage Adjust
For further information pertaining to control lines and voltage adjustments see “DUT Control Lines” on
page 54 .
Test Set Interface
The Test Set Interface connector is used to send address and data to the Test Set from the PNA-X.
Pass Through Interface
Connection to another Test Set.
Line Module
The line fuse, as well as a spare, reside within the line module. Figure 6 on page 20 illustrates where the
fuses are located and how to access them.
U3022AH10 User's and Service Guide 19