U3020AS62
Performance Verification
Performance Verification
The following procedure will confirm that the Test Set is
functional.
Equipment Required
•
Working LAN System
•
PNA Network Analyzer with up to 26.5 GHz frequency range
•
RF coaxial cables with 3.5 mm connectors
Equipment Setup
1. Configure PNA and Test Set as shown in
Figure 8.
2. Turn On the PNA and Test Set.
•
The Test Set LED Indicators should indicate the following after 1 minute:
— ATTN - OFF
— LAN - ON
— PWR - ON
3. Preset the PNA.
4. PNA frequency range: 10 MHz to 26.5 GHz.
5. Set the PNA to Measure S21, Scale to 5 dB/Div.
Figure 8
Equipment Setup
NWA
LAN
Test Set
Test Set
MEASUREMENT
To Instrument
Controller
NWA
LAN
CAL
To Instrument
Controller
22
Keysight U3020AS62 User's and Service Guide
