Keysight Technologies S9100A, Startup Manual

Page: 95 / 107

8 S910xA SCPI Programming Commands
S9100A 5G Multi-Band Vector Transceiver, Startup Guide 91
8 S910xA SCPI Programming Commands
Keysight S910xA configurations support a SCPI service beginning with version 2.13.0
that provides programming features for the following:
Control the Frequency Reference for 10 MHz internal or 10/100 MHz external
reference signal
Query the "locked" state of the Frequency Reference
Route the M9019A PXI Chassis Front Panel triggers to PXI Backplane Triggers
Set up Conformance Test configurations on appropriately configured solutions
with S91XXBLK-1FP licensees
By default, the SCPI service can be reached via
hislip
address
314
, for example:
“tcpip0::localhost::hislip314::instr”
IEEE 488.2 Common Commands on page 93
*IDN? on page 93
*RST on page 93
System Subsystem on page 94
:SYSTem:ERRor[:NEXT]? on page 94
:SYSTem:OPTion? on page 94
Status Subsystem on page 94
:STATus:OPERation:ROSCillator? on page 94
Display Subsystem on page 94
:DISPlay:ENABle 0|1|OFF|ON on page 94
:DISPlay:ENABle? on page 94
Service Subsystem on page 95
:SERVice:PATH:IFLoopback[:STATe] 0|1|OFF|ON on page 95
:SERVice:PATH:IFLoopback[:STATe]? on page 95
Reference Oscillator Subsystem on page 95
:ROSCillator:SOURce INTernal | EXTernal on page 95
:ROSCillator:SOURce? on page 95
:ROSCillator:FREQuency:EXTernal <value> on page 95
:ROSCillator:FREQuency:EXTernal? on page 95
:ROSCillator:LOCKed[:STATe]? on page 95
Chassis Subsystem on page 96
:CHASsis:TRIGger:ROUTe TRIG1|TRIG2,NONE,PXI0...PXI7 on page 96
:CHASsis:TRIGger:ROUTe? TRIG1|TRIG2 on page 96
Source Subsystem on page 97
[:SOURce]:CONFigure:ADDRress PRIMary|SECondary,{hislip
number}
on page 97