background image

 30                                                                                                                               Installation Note E8356-90001

In This Guide
Getting Help with Your Analyzer

-

Getting Help with Your Analyzer

Help System

Use on-line Help to quickly reference programming and user documentation. 

On-line Help is only available in English.
We recommend that you begin by accessing Help and reading the topics in the 

Quick Start section. To access this information:

— On the analyzer's front panel, press the Help button. Or, on the PNA display, 

click Help, then Network Analyzer Help.

— Click Quick Start in PNA Help.

PNA on the Internet

The PNA Family Network Analyzer Support website is another resource for help 
with the analyzer. You can find all PNA documentation and other resources at: 

http://na.support.keysight.com/pna

.

You can also post your questions for the measurement experts at the Keysight 

Network Analyzer Forum: 

http://www.keysight.com/owc_discussions

.

Contacting Keysight

Assistance with test and measurements needs and information on finding a 
local Keysight office are available on the Web at: 

www.keysight/find/assist

. If 

you do not have access to the Internet, please contact your Keysight field 
engineer

In any correspondence or telephone conversation, refer to the Keysight 

product by its model number and full serial number. With this information, 

the Keysight representative can determine whether your product is still 

within its warranty period. 

Summary of Contents for PNA Series









































Reviews: