Applications Programming Interface (API) Overview
8
Keysight P9241/42/43A Oscilloscopes Startup Guide
43
Launching Interactive IO from Connection Expert on the Host PC
The Interactive IO utility can be started on any controller PC that has the Keysight
IO Libraries Suite installed. Typically, you click on the Keysight IO Control icon in
the taskbar and choose
Utilities > Interactive IO
from the popup menu (see the
SCPI
Programmer's Guide
for complete instructions).
On the host PC (that is, the PC that has the USB 3.0 connection to the
oscilloscope), you can also launch the Interactive IO utility from within Connection
Expert:
1
Click the Keysight IO Libraries Suite icon in the task bar and choose
Connection
Expert
from the popup menu.
2
In the Connection Expert window's Instruments tab, select the connected
oscilloscope under the LAN (TCPIP0) interface.
Summary of Contents for P9241A
