Keysight Technologies P9241A, Startup Manual

Page: 27 / 54

Verify Operation
6
Keysight P9241/42/43A Oscilloscopes Startup Guide 27
The Keysight InfiniiVision P924xA SFP has the same user interface as other
standalone Keysight InfiniiVision oscilloscopes.
If the oscilloscope is not listed in Keysight InfiniiVision Launcher
If your P924xA oscilloscope is not recognized after being plugged into a USB port
on your PC (that is, it does not show up in the Keysight InfiniiVision Launcher
window):
• Reboot your PC.
This may be needed after a software update or the first time a P924xA
oscilloscope is plugged into a USB port it has not previously been connected
to.
• If the oscilloscope still does not appear, try rescanning in the Keysight
Connection Expert:
a
Close the Keysight InfiniiVision Launcher.
b
Start the Keysight Connection Expert, by selecting Start > All Programs >
Keysight Connection Expert .
If any or all oscilloscopes are still not visible, in the Instruments tab, click
Rescan .
c
Restart the Keysight InfiniiVision Launcher.