Keysight Technologies NFA X-Series Getting Started And Troubleshooting Manual Download Page 10

Page: 10 / 99

10 Keysight NFA X-Series Getting Started and Troubleshooting Guide

Quick Start
Initial Inspection

Initial Inspection

Inspect the shipping container and the cushioning material for signs of stress.

Retain the shipping materials for future use, as you may wish to ship the

analyzer to another location or to Keysight Technologies for service.

Verify the Contents

Verify the shipping container contents using the box contents list.

Shipping Problems?

If the shipping materials are damaged or the contents of the container are

incomplete:

— Contact the nearest Keysight Technologies office.

— Keep the shipping materials for the carrier’s inspection.

— If you must return an analyzer to Keysight Technologies, use the original (or

comparable) shipping materials. See

“Returning an Analyzer for Service”

on page 93

Summary of Contents for NFA X-Series




































































































Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands

Keysight Technologies NFA X-Series, Getting Started And Troubleshooting Manual

Search results

Summary of Contents for NFA X-Series

Reviews:

Related manuals for NFA X-Series

Brands by name

Popular brands