Keysight Technologies N9330B User Manual Download Page 95

Page: 95 / 107

Instrument Messages

Warning List

No.

Warning Message

Open segment error. Overlapped with other segment(s).

Continue in 3 seconds.

Open segment error. The start is greater than the stop.

Continue in 3 seconds.

Edit segment error. The start is greater than the stop.

Continue in 3 seconds.

Edit segment error. Overlapped with other segment(s).

Continue in 3 seconds.

Trace operation error. Incompatible traces. Continue in 3

seconds.

Trace overlap error. Incompatible traces. Continue in 3

seconds.

Edit segment error. Segment cannot be vertical. Continue

in 3 seconds.

File name already exists, overwrite it? Press ENTER to

overwrite. Press ESC to abort.

File name too long. Max. 20 char allowed. Press

ENTER/ESC to abort.

Calibration invalid. Frequency changed. Continue in 3

seconds.

Calibration will be invalidated. Temperature out of range.

Press ENTER/ESC to abort.

Cannot open segment. Segment cannot be vertical.

Continue in 3 seconds.

Save file error. File name cannot be null. Press ENTER/ESC

to abort.

Summary of Contents for N9330B












































































































Search results

Summary of Contents for N9330B

Reviews:

Related manuals for N9330B

Brands by name

Popular brands

Keysight Technologies N9330B, User Manual

Search results

Summary of Contents for N9330B

Reviews:

Related manuals for N9330B

Brands by name

Popular brands