Keysight Technologies N9330B, User Manual

Page: 20 / 107

Getting Started 
Working with Batteries
14
Working with Batteries
Installing a Battery
Viewing Battery Status
Determine the battery status in either of the following
methods:
• Check the battery icon in the lower right corner of the
front panel screen: it indicates the approximate level
of charge.
• The LED on the battery indicates the remaining
battery power.
• Press
[SYS] > {More} > {Status}
to check the current
battery voltage.
CAU-
CAUTION
Full charge the battery before first using the analyzer.
Step Notes
1 Open the battery cover Use a phillips type screwdriver,
loosen the retaining screw, then
pull the battery cover open.
2 Insert the battery Observe correct battery polarity
orientation when installing.
3 Close the battery cover Push the cover closed, then
re-fasten the cover with the
retaining screw.