Keysight Technologies N9321C, User Manual, Page: 108 / 220

Functions and Measurements
Files Operation
100
Loading a File
This feature will recall (load) onto the displayed screen a previously
saved filename and type compatible with this analyzer. The file
types are described above.
1 Press
File > Directory > {Memory Type}
to select a directory.
2 Rotate the knob to highlight a file.
3 Press
Recall
to recall this file.
The wanted file will be loaded immediately.
Loading a Task Planner File
Please refer to the following procedures to load a task planner file.
1 Press
Mode > Task Planner
or
File > View FileType > TPF
to view the
task planner file list.
2 Rotate the knob to highlight the task planner file which you need.
3 Press
Recall
to load the task planner file. The measurement task
will list in sequence.
4 Press
Run
to initiate the measurement in sequence.
For the automatic task, all the measurement tasks are executed
automatically without interruption. For the manual task, the
program is paused and releases a result report when each
measurement is finished. The program will be continued once you
input the next instruction.
For the manual-if-failed task, the measurement tasks are executed
continuously unless there is a failed result.
NOTE
The task planner file is created by the BSA PC software. For the task planner
saving and editing, please refer to the software online help for details.