Keysight Technologies N6900 Series, Operating And Service Manual

Page: 35 / 358

STATus Subsystem
STATus
:OPERation
[:EVENt]? Queries the operation event register.
:CONDition? Queries the operation condition register.
:ENABle < value > Sets the operation enable register.
:NTRansiton < value > Sets the Negative transition filter
:PTRansiton < value > Sets the Positive transition filter
:USER<1|2>
:SOURce EXPRession<1-8>|NONE Selects an expression to drive the user-defined status bits.
:PRESet Presets all Enable, PTR, and NTR registers.
:QUEStionable<1|2>
[:EVENt]? Queries the questionable event register.
:CONDition? Queries the questionable condition register.
:ENABle < value > Sets the questionable enable register.
:NTRansiton < value > Sets the Negative transition filter
:PTRansiton < value > Sets the Positive transition filter
SYSTem Subsystem
SYSTem
:BBR
:EVENt < "string" > Adds an event string into the BBR event log.
:SNAPshot <value> Captures a data snapshot of the specified length.
:STATus? Returns the completion status of the snapshot in percent.
:STATe? Returns true (1) if the Black Box Recorder is logging.
:TIME? Returns the length of the Black Box Recorder data.
:COMMunicate
:LAN|TCPip:CONTrol? Returns the initial socket control connection port number.
:RLSTate LOCal|REMote|RWLock Configures the remote/local state of the instrument.
:DATE <yyyy>,<mm>,<dd> Sets the date of the system clock.
:ERRor? Reads and clears one error from the error queue.
:LFRequency? Returns the power-line reference frequency.
:LFRequency
:MODE AUTO|MAN50|MAN60 Specifies automatic or manual line frequency detection.
:PASSword
:FPANel
:RESet Resets the front panel lockout password to zero.
:REBoot Reboots the instrument to its power-on state.
:SECurity
:IMMediate Clears all user memory and reboots the instrument.
:SIGNal
Keysight N6900/N7900 Series Operating and Service Guide 35
1 Quick Reference