Keysight Technologies N6900 Series, Operating And Service Manual

Page: 30 / 358

:SOURce EXPRession<1-8>|NONE Sets the on-couple signal source to an expression.
:DELay
:FALL < value > Sets the output turn-off sequence delay.
:RISE < value > Sets the output turn-on sequence delay.
:INHibit
:MODE LATChing|LIVE|OFF Sets the operating mode of the remote inhibit digital pin.
:PON
:STATe RST|RCL0 Sets the output power-on state.
:PROTection
:CLEar Resets the latched protection.
:MODE Sets the turn-off behavior for all protection conditions.
:TEMPerature
:MARGin? Returns the margin remaining before the over-tem-
perature trips.
:USER
[:STATe] 0|OFF|1|ON Enables or disables the user-defined protection.
:SOURce EXPRession<1-8>|NONE Sets the user-defined protection source to an expression.
:WDOG
[:STATe] 0|OFF|1|ON Enables or disables the I/O watchdog timer.
:DELay < value > Sets the watchdog delay time.
:RELay
:LOCK
[:STATe] 0|OFF|1|ON Enables or disables the locked-closed state of the output
relays.
:POLarity NORMal|REVerse Sets the polarity of the output relays.
:ENABle 0|OFF|1|ON Enables or disables the polarity reversal function.
SENSe Subsystem
SENSe
:AHOur
:RESet Resets the amp-hour or watt-hour measurement to zero.
:BBR
:PERiod < value > Sets the recording period of the black box recorder in seconds.
:CURRent
[:DC]
:RANGe
[:UPPer] < value > Selects a DC current measurement range.
:AUTO 0|OFF|1|ON Enables or disables seamless measurement auto ranging.
:ELOG
:CURRent
[:DC]
:RANge
[:UPPer] < value > Selects the Elog current measurement range.
:AUTO 0|OFF|1|ON Enables or disables Elog seamless measurement autoranging.
1 Quick Reference
30 Keysight N6900/N7900 Series Operating and Service Guide