Keysight Technologies N6900 Series, Operating And Service Manual

Page: 29 / 358

MEASure Subsystem
MEASure
[:SCALar]
:CURRent
[:DC]? Takes a measurement; returns the averaged current.
:ACDC? Takes a measurement; returns the RMS current (AC + DC).
:HIGH? Takes a measurement; returns the High level of a current pulse.
:LOW? Takes a measurement; returns the Low level of a current pulse.
:MAXimum? Takes a measurement; returns the maximum current.
:MINimum? Takes a measurement; returns the minimum current.
:POWer
[:DC]? Takes a measurement; returns the averaged power.
:MAXimum? Takes a measurement; returns the maximum power.
:MINimum? Takes a measurement; returns the minimum power.
:VOLTage
[:DC]? Takes a measurement; returns the averaged voltage.
:ACDC? Takes a measurement; returns the RMS voltage (AC + DC).
:HIGH? Takes a measurement; returns the High level of a voltage pulse.
:LOW? Takes a measurement; returns the Low level of a voltage pulse.
:MAXimum? Takes a measurement; returns the maximum voltage.
:MINimum? Takes a measurement; returns the minimum voltage.
:ARRAY
:CURRent
[:DC]? Takes a measurement; returns the instantaneous current.
:POWer
[:DC]? Takes a measurement; returns the instantaneous power.
:VOLTage
[:DC]? Takes a measurement; returns the instantaneous voltage.
OUTPut Subsystem
OUTPut
[:STATe] 0|OFF|1|ON Enables or disables the output.
:COUPle
[:STATe] 0|OFF|1|ON Enables or disables output coupling.
:DOFFset < value > Sets a delay offset to synchronize coupled output state
changes.
:MAX
:DOFFset? Returns the delay offset required for this instrument.
:OFF
:SOURce EXPRession<1-8>|NONE Sets the off-couple signal source to an expression.
:ON
Keysight N6900/N7900 Series Operating and Service Guide 29
1 Quick Reference