Keysight Technologies N6900 Series, Operating And Service Manual

Page: 28 / 358

HCOPy Subsystem
HCOPy
:SDUMp
:DATA? [BMP|GIF|PNG] Returns an image of the front panel display.
:DATA
:FORMat BMP|GIF|PNG Specifies the format for front panel images returned.
IEEE-488 Common Commands
*CLS Clear status command.
*ESE < value > Event status enable command and query.
*ESR? Event status event query.
*IDN? Identification Query.
*LRN? Returns a sequence of SCPI commands.
*OPC Sets the OPC (operation complete) bit in the standard event register.
*OPC? Returns a 1 to the output buffer when all pending operations complete.
*OPT? Returns a string identifying any installed options.
*RCL < value > Recalls a saved instrument state.
*RST Resets the instrument to pre-defined values that are either typical or safe.
*SAV < value > Saves the instrument state to one of ten non-volatile memory locations.
*SRE < value > Service request enable command and query.
*STB? Status byte query.
*TRG Trigger command.
*TST? Self-test query.
*WAI Pauses additional command processing until all pending operations are complete.
INITiate Subsystem
INITiate
[:IMMediate]
:ACQuire Initiates the measurement trigger system.
:ELOG Initiates external data logging.
:TRANsient Initiates the transient trigger system.
:CONTinuous
:TRANsient 0|OFF|1|ON Continuously initiates the transient trigger system.
LXI Command
LXI
:IDENtify
:STATe 0|OFF|1|ON Turns the front panel LXI identify indicator on or off.
1 Quick Reference
28 Keysight N6900/N7900 Series Operating and Service Guide