Keysight Technologies N6705C, Operating And Service Manual, Page: 423 / 476

Test Record Form - Keysight N6763A and N6765A
N6763A and N6765A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
Low Voltage measured over interface:
Both
Both
Both
Both
Both +5 mV
Vout − 10 mV
19.989 V
Vout − 16 mV
Vout − 2.1 mV
_______
_______
_______
_______
_______ + 20 mV
Vout + 10 mV
20.011 V
Vout + 16 mV
Vout + 2.1 mV
CV Load Effect: Both – 2 mV _______ + 2 mV
CV Source Effect: Both – 0.5 mV _______ + 0.5 mV
CV Ripple and Noise
peak-to-peak:
rms:
Both
Both N/A
N/A _______
_______ + 5 mV
+ 1 mV
Transient response
Voltage @ 100 μs:
Voltage @ 100 μs with Option 760/761:
Both
Both – 30 mV
– 200 mV
_______
_______ + 30 mV
+ 200 mV
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
Low Current measured over interface:
Both
Both
Both
Both
Both + 35 mA
Iout − 60 mA
49.935 A
Iout − 60 mA
Iout − 1.85 mA
_______
_______
_______
_______
_______ + 65 mA
Iout + 60 mA
50.065 A
Iout + 60 mA
Iout + 1.85 mA
CC Load Effect: Both – 12 mA _______ + 12 mA
CC Source Effect: Both – 5 mA _______ + 5 mA
Test Description N6763A Setting N6765A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
Voltage Readback Low:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
Current Readback Low:
CC Load Effect, Source Effect: 10 mV, 15 A
20 V, 15 A
2 V 15 A
20 V, 15 A
6 V, from 25 A to 50 A
50 mA, 6V
50 A, 6 V
1.5 A, 6 V
50 A, 6 V
10 mV, 25 A
20 V, 25 A
2 V, 25 A
20 V, 25 A
10 V, from 25 A to 50 A
50 mA, 10 V
50 A, 10 V
1.5 A, 10 V
50 A, 10 V
Keysight N6705C Operating and Service Guide 423
8 Verification and Calibration