Keysight Technologies N6705C, Operating And Service Manual

Page: 10 / 476

Safety Symbols
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or
the like that, if not correctly performed or adhered to, could result in personal injury or DEATH.
Do not proceed beyond a WARNING notice until the indicated conditions are fully understood
and met.
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like
that, if not correctly performed or adhered to, could result in damage to the product or loss of
important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
Direct current
Alternating current
Frame or chassis terminal
Standby supply. Unit is not completely disconnected from AC mains when switch is off.
Caution, risk of electric shock
Caution, refer to accompanying documents
Earth ground terminal
The CE mark is a registered trademark of the European Community.
The ETL mark is a registered trademark of Intertek.
The C-tick mark is a registered trademark of the Spectrum Management Agency of Australia.
This signifies compliance with the Australian EMC Framework regulations under the terms of the
Radio Communications Act of 1992.
South Korean Class A EMC Declaration
This equipment is Class A suitable for professional use and is for use in electromagnetic envir-
onments outside of the home.
Contains one or more of the 6 hazardous substances above the maximum concentration value
(MCV), 40 Year EPUP.
ISM1-A This text indicates that the instrument is an Industrial Scientific and Medical Group 1 Class A
product (CISPER 11, Clause 4).
ICES/NMB-
001 This text indicates product compliance with the Canadian Interference- Causing Equipment
Standard (ICES-001).
Legal and Safety Information
10 Keysight N6705C Operating and Service Guide