36 Installation Note N5222-90128
Installation Procedure for the Upgrade
-
Step 21. Reinstall the A71 and A74 and Install the New A72 and A73
Bias Tee Combiner Assemblies
Refer to
for this step of the procedure. New parts are listed in
. Use a T-10 TORX driver to tighten all screws.
1.
Reinstall the
N5240-60097
cable as shown. Note the orientation of the
cable (item
➀
).
2.
Install the N5240-60098 (x3) cable as shown. Note the orientation of the
cable (item
➁
).
3.
Add 5023-3299 (x4) clamps and 0515-2141 (x4) clamp screws as shown
(item
➂
). Torque to 6 in-lbs.
Figure 17
Install cables and clamps to bias tee combiners (N5240-60098,
N5240-60097, 5023-3299, and 0515-2141)
