manualshive.com logo in svg

Keysight Technologies N5221A, Service Manual, Page: 107 / 368

Share
Download
Keysight Technologies N5221A Service Manual Download Page 107

Keysight N5221A/22A Service Guide                                                                                            4-33

Troubleshooting
Measurement System Troubleshooting

Click the 

Hardware

 tab, click 

Device Manager

, and then expand

 

Keysight PNA DSP Device

 in the resulting list. The following entry 

should be listed: 

Keysight Technologies DSP Driver #2 

and should 

be enabled.

2. If the entry is not present or if the icon to the left of the name is a 

yellow box containing an exclamation mark (!), navigate the following 

directories and verify the presence of the following file:

 

C:\WINNT\system32\drivers\spampnp.sys

.

3. If you have verified that the DSP driver is present and enabled, but all 

traces are still missing in all bands, go to 

“Checking the Source 

Group” on page 4-34

.

—

If the traces exhibit power drops in some frequency bands

, the problem is 

in the source group. Go to 

“Source Group Tests” on page 4-34

 and perform 

the tests that correspond to the problems seen.

Single Trace (A, B, C, D, R1, R2, R3, or R4) Only

If the trace is missing in all bands or has notches or roll-off, go to 

“Checking 

the Signal Separation Group” on page 4-39

.

A, B, R1, and R2 Traces Only

The problem is in the source 1 group, go to 

“Checking the Source Group” on 

page 4-34

. 

C, D, R3, and R4 Traces Only

The problem is in the source 2 group, go to 

“Checking the Source Group” on 

page 4-34

. 

Summary of Contents for N5221A

















































































































































































































































































































































































Reviews:

No comments