2 Getting Started
Proper Use and Cleaning
The instrument cover protects against physical contact with internal assemblies that contain hazardous voltages, but does
not protect internal assemblies against contact with liquids. To avoid damage and personal injury, ensure that liquids are
positioned away from the instrument.
If this product is not used as specified, the protection provided by the equipment could be impaired.
This product must be used in a normal condition (in which all means for protection are intact) only.
Cleaning Suggestions
To prevent electrical shock, disconnect the instrument from mains before cleaning. Use a dry cloth or
one slightly dampened with water to clean the external case parts. Do not attempt to clean internally.
Cleaning connectors with alcohol shall only be done with the instruments power cord removed, and in a
well-ventilated room. Allow all residual alcohol moisture to evaporate, and the fumes to dissipate prior to
energizing the instrument.
To ensure good connections, regularly clean the instrument’s front and rear panel connectors with alcohol.
To prevent dust build-up that could potentially obstruct ventilation, periodically clean the instrument’s cover. Use a dry
cloth or a cloth slightly dampened with water to clean the external case parts.
Returning an Instrument to Keysight Technologies
1. Gather as much information as possible about the instrument’s problem.
2. Contact Keysight using the phone number that is specific to your geographic location. These phone numbers are
listed on the Internet at
http://www.keysight.com/find/assist
. If you do not have access to the Internet, contact
your Keysight field engineer.
After you provide information about the instrument and its condition, you will receive information about where to
ship your instrument for repair.
3. Ship the instrument in the original factory packaging materials, if available, or use similar packaging to properly
protect the instrument.
Contacting Keysight
Assistance with test and measurements needs, information on finding a local Keysight office, and information on pur-
chasing accessories and documentation are available on the Internet at:
http://www.keysight.com/find/assist
If you do not have access to the Internet, please contact your Keysight field engineer.
In correspondence or telephone conversation, refer to the instrument by its model number and full serial number.
With this information, the Keysight representative can determine if your unit is still within its warranty period.
24
Keysight N5194A UXG X-Series Agile Vector Adapter Getting Started Guide