Keysight Technologies N5171B EXG, User Manual

Page: 211 / 473

Keysight EXG and MXG X-Series Signal Generators User’s Guide 195
Basic Digital Operation (Option 653/655/656/657)
Waveform Sequences
Assumption : A waveform sequence that has two different segments has been created and stored
(see previous example on page 193 ).
1. Select the sequence:
Press Mode > Dual ARB > More > Waveform Sequences > highlight the desired sequence >
Edit Selected Waveform Sequence .
2. Change the first segment so that it repeats 100 times:
Highlight the first segment entry and press Edit Repetitions > 100 > Enter .
The cursor moves to the next entry.
3. Change the repetition for the selected entry to 200:
Press Edit Repetitions > 200 > Enter .
4. Save the changes made in the previous steps:
Press More > Name and Store > Enter .
To save the changes as a new sequence:
a. Press More > Name and Store > Clear Text .
b. Enter a file name (for example, RAMP200).
c. Press Enter .
The edited sequence saves as a new waveform sequence.
Playing a Sequence
If you have not created a waveform sequence, refer to “Creating a Sequence” on page 192 .
1. Select a waveform sequence:
a. Press Mode > Dual ARB > Select Waveform .
b. Highlight a waveform sequence (for this example, RAMP200) from the
Sequence
On
column.
c. Press Select Waveform .
The display shows the currently selected waveform (for example,
Selected Waveform:
SEQ:RAMP200
).
To play a waveform segment individually or as part of a waveform
sequence, the segment must reside in BBG media. See also, “Loading a
Waveform Segment into BBG Media” on page 189 .